建筑节能初期设计阶段的能耗模拟与分析

针对建筑节能初期设计阶段,采用建筑环境设计软件Ecotect对某节能示范楼外窗遮阳情况进行模拟分析,得到各朝向外窗的遮阳形式以及大小设计范围,为下一阶段包括外遮阳形式,构造尺寸和各朝向房间的窗墙比、外窗材料选择提供了设计参考.     

供应链模式中采购管理组织结构沟通效率评价

为了评价采购管理组织结构沟通效率,利用趋势模型为组织结构构建提供科学可见的过程,并量化计算交流阻力,为项目选择沟通效率最高的组织结构.将此方法应用于采购实例评价,经过验证,此方法有一定的科学性和实用性.     

南水北调中线工程安阳段渠坡换填土的强度特性研究

为了分析南水北调中线工程安阳段渠坡的稳定性,对该渠坡换填土在不同含水率下进行了不固结不排水三轴剪切试验.研究结果表明:剪切速率对基质吸力的影响较大,而对强度的影响较小;通过比较确定了合适的剪切速率;含水率相同的试样在不同围压下的强度值在pf -qf坐标上呈良好的线性关系;得到了试样在不同含水率下的总强度指标,建立了总内...     

美军作战实验室建设研究

简要回顾了美军作战实验发展的历史,从军种到联合详细阐述了美军作战实验室完整的体系,并简要介绍了各作战实验室所完成的典型实验,研究了美军作战实验室主要的实验方法和技术手段,剖析了美军作战实验室的运行机制,探讨了美军作战实验室建设带给我们的启示。     

匈牙利法的末段两层火力反TBM目标分配优化

介绍了匈牙利法解决Assignment Problem的基本原理,对匈牙利法解决指派问题的解题步骤和特殊情况进行了说明。在给出末段两层火力防御TBM的目标分配原则的基础上,阐述了相关概念,改进了匈牙利法运用方式,并建立了目标分配模型。最后通过实例的解算,证明了该方法应用于末段两层火力防御TBM目标分配中的可行性,为末段协同反TBM的目标分配提供了一种有效的算法。     

概率分布模型的飞机战备完好率评估与预测

飞机战备完好率是军用飞机战斗力的重要体现.在分析目前部队常用的飞机战备完好率算法缺陷的基础上,建立了基于概率分布的飞机战备完好率计算模型,该模型体现了飞机任务可靠性、维修性与战备完好性之间的关系.以某型飞机为例,通过分析飞机任务可靠度,利用飞机可靠性、维修性、保障性及作战训练任务的历史统计数据,依据概率分布模型对飞机的...     

基于物元模型-AHP的联合电子防空作战效能评估

针对现代防空作战训练中联合电子防空作战效能评估的问题,引入物元模型,并结合层次分析法(AHP)提出了基于物元模型-AHP的联合电子防空作战效能评估方法.以某次复杂电磁环境下联合电子防空演习任务为背景,建立了作战效能评估指标体系和评估模型,给出了评估模型的仿真算例,结果表明,该方法在联合电子防空作战的效能评估中是可行和有...     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

知识图谱的预警探测体系探测效能贝叶斯评估方法

战争中,预警探测体系作为典型的复杂系统,其探测效能发挥情况的有效评估一直是亟需人们研究解决的重要现实问题.突破了传统效能评估方法的局限,在分析了知识图谱技术、贝叶斯评估方法基本原理的基础上,提出了基于两者综合运用的预警探测体系探测效能评估新方法,利用专家知识和实验数据构建知识图谱,并进一步使用贝叶斯网络方法实施知识推理...